User's Manual

Chapter 1
6
To insert the battery
1. Insert the battery as shown, aligning the
exposed metal contacts on the edge of the
battery with the contacts on the phone.
2. Slide the back cover onto your phone.
1
2
1-4 Installing and removing a micro SD card
To install / remove a micro SD card
1. Remove the back cover and battery, in the way indicated previously.
2. You can nd the micro SD car slot located above the SIM card slot.
Slide the metallic part of the slot to the left, and ip it open.
2. To install a micro SD card: With the label side (usually the side with
the card manufacturer’s name) face up, and the barcode/serial number
side face down, slide the card gently into the micro SD card slot.
To uninstall a micro SD card: Slide the micro SD card out.
3. Flip the metallic part of the cover back into its position, and slide
it to the right to secure it.
4. Replace the battery and the phone cover as described previously.
Label side
CAUTION A micro SD card ts only in one orientation. DO
NOT force the card into the slot!