Operation Manual

15 Chapter 1: Basics
Charging other devices
Use your ASUS Phone to power-charge other mobile devices.
To charge other devices with ASUS Phone:
1. ConnectoneendoftheUSBcabletothedevicethatyouwanttochargeandtheotherendto
the OTG cable.
NOTE: The OTG cable is purchased separately.
2. ConnecttheotherendoftheOTGcabletoyourASUSPhone.
IMPORTANT!EnsurethattheOTGcableisconnectedtoyourASUSPhonetoensurethatyourdevice
charges properly.
Charging modes
Choose either of the following modes:
OTG mode: Charges attached devices a up to 0.5A standard current.
Reverse charging mode (optional): When this mode is selected, your ASUS Phone turns o
to provide rapid reverse charging that can output a high speed, high charging current up to
1.5A - depending on the device being charged. In this mode, your ASUS Phone can still monitor
thechargelevels.WhenbatterypoweronyourASUSPhoneisbelow20%,yourASUSPhone
automatically turns on and changes to OTG charging mode.
NOTE: The reverse charging mode only supports devices with CDP (Charging Downstream Port) mode.
OTG cable
USB cable