User Guide E11689
First Edition/ May 2016 Model:ASUS_Z01FD Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit www.asus.com.
Side features Audio jack Microphone Micro SIM, Nano SIM/ microSD combo card slot Volume key Power key Microphone Speaker USB Type C port NOTE: The USB Type-C port supports USB2.0 transfer rate.
Rear features NFC detaction aera RGB sensor / Camera flash Rear camera Laser focus Fingerprint sensor Rear cover Charging your ASUS Phone To charge your ASUS Phone: 1. Connect the USB connector into the power adapter’s USB port. 2. Connect the other end of the USB Type C cable to your ASUS Phone. 3. Plug the power adapter into a wall socket.
IMPORTANT! • When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible. • When charging your ASUS Phone through your computer, ensure that you plug the USB Type C cable to your computer’s USB 2.0 / USB 3.0 port. Avoid charging your ASUS Phone in an environment with ambient temperature of above 35 °C (95 °F). • NOTES: • Use only the power adapter that came with your device.
2. Insert the Micro SIM / Nano SIM or MicroSD card(s) into the card slot(s). Micro-SIM1 Micro SD Micro-SIM1 Nano-SIM2 IMPORTANT: You can only use the Nano SIM card or the MicroSD card at a time. 3. Push the tray to close it NOTES: • • The Micro SIM / Nano SIM card slots support LTE, WCDMA and GSM/EDGE network bands. The microSD card slot supports microSD and microSDHC card formats. IMPORTANT: Both Micro SIM and Nano SIM card slots support 2G GSM/EDGE, 3G WCDMA and 4G LTE network bands.
FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Hearing Aid Compatibility Information This phone has been tested and rated for use with hearing aids for some of the wireless technologies it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise.
Industry Canada Statement This device complies with RSS-247 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Avis d’industrie Canada Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
RF Radiation Exposure Statement For body worn operation, this phone has been tested and meets RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines.
similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided. The highest FCC SAR values for the device are as follows: • 1.110 W/Kg(Head) • 1.
CE Mark Warning CE marking for devices with wireless LAN/ Bluetooth This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.The highest CE SAR values for the device are as follows: • 0.363 W/kg@10g (Head) • 1.350 W/kg@10g (Body) This device is restricted for indoor use only when operating under 5150 MHz to 5350 MHz of frequency range.
• For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. • When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance. Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods.
• Do not remove the non-detachable Li-polymer battery as this will void the warranty. • Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C. • Do not remove and replace the battery with a non-approved battery. • Do not remove and soak the battery in water or any other liquid. • Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin.
Caution Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter. • Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between 0 °C (32 °F) and 35 °C (95 °F). • Do not disassemble the ASUS Phone or its accessories. If service or repair is required, return the unit to an authorized service center.
Regional notice for Singapore This ASUS Phone complies with IDA Standards. Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
EU Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
Declaraţie de conformitate UE Subsemnatul, Producător : ASUSTeK COMPUTER INC. Adresă: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Reprezentant autorizat în Europa: ASUS COMPUTER GmbH Adresă, Oraş: HARKORT STR.
UE Declaración de Conformidad Nosotros, los abajo firmantes, Fabricante: ASUSTeK COMPUTER INC. Dirección: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Representante autorizado en Europa: ASUS COMPUTER GmbH Dirección, Ciudad: HARKORT STR.
ASUS Address: 4F, 150 LI-TE RD., PEITOU, TAIPEI, TAIWAN Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.
