User Guide

Using ZenFlash with your ZenFone
1. TakeoutyourZenFlashfromthesiliconcase.
2. PullouttheUSBcablefromthebottomofyourZenFlash.
3. Peelothecoveringoftheadhesivetransparentpadonthebackof
thehoopandloopfastenerset.
4. FirmlypositionyourZenFlashundertherearcameraofyourZenFone.
5. ConnectthemicroUSBcabletoyourZenFone.
6. LaunchtheZenFlashapponyourZenFoneandstartshooting.
NOTE: Thetransparentadhesivepad(withnon-water-solubleglue)can
beusedrepeatedly.Ifdirty,rinseitandallowtoair-drybeforereuse.
< 4 CM
IMPORTANT!
•Foraccurateresponses,useyourZenFonewithoutacaseorsleeve.
•EnsurethephotodiodeofyourZenFlashandtheLEDashofyour
ZenFoneareplacedinastraightline.
•ThedistancebetweenthephotodiodeandyourLEDashhastobeno
morethan4cm.
•EnsureyourZenFlashdoesnotblocktheLEDashonyourZenFone.
•Forbetterresult,useyourZenFlashinlow-lightconditionsandkeepitat
least1meterawayfromyoursubject.