E-Manual

12
ZenFlash Camera Software Manual
No Flash: Disables the ZenFlash.
Manual Flash (default): Youcanmanuallysettheash
parameters.
2. Tap
onthebottomlefttochooseashscenariomodes.
Low Noise Mode: For optimal results in a dark, indoor
enviroment.
Night Backlight Mode: For optimal results in an outdoor
environment at night.
3. WhenconnectingtheZenFlashforthersttime,theash
modewillbedefaultedto“ManualFlash”,andtheashscenario
defaulted to Low Noise Mode. The appropriate control bar will
also be displayed.
4. Only the Target control bar will be displayed on the camera home
screen under Low Noise Mode. Select between 0.5, 1.0, 1.5, 2.0
and 2.5. The smaller the number, the darker the target and the
bigger the number, the brighter the target will be.
3.4 Flash Mode Setting
ZenashCameraallowsyoutoturntheZenFlashonoro,andFlash
Scenario Mode.
1. Tap
in the bottom left corner to switch between No Flash and
Manual Flash.