E-Manual

11
ZenFlash Camera Software Manual
3.3 Shooting with ZenFlash
3.3.1 Normal Shooting
Tap to capture an image. After capturing a photo, the ZenFlash will
need a short time to recover power and the capture icon will become
opaque
, the icon will slowly become more visible as the ZenFlash
recovers power. During this time, the capture icon will be disabled, once
power has been recovered, the icon will change to
and then you
may capture another photo.
3.3.2 Burst Mode
Tap and set Burst Mode, then tap to shoot multiple photos.
When using the ZenFlash, Burst Mode will be defaulted to 3 photos.
There will be a short pause for the power to recover between each
photo captured. Ensure to keep your phone stable during this time to
prevent the photo from blurring.
After connecting the ZenFlash, Burst Mode can be set to single or 3
images, and allows you more advanced camera operations, such as
settingtheZenFlash’sashmode,adjustingashintensity,andash
delay to achieve better capture results. For more information please
refer to 3.4 and 3.5 for more information.