User Manual

00A4 SCSI initialization is started
00A5 SCSI Reset
00A6 SCSI Detect
00A7 SCSI Enable
00A8 Setup Verifying Password
00A9 Start of Setup
00AA Reserved for ASL (see ASL Status Codes section below)
00AB Setup Input Wait
00AC Reserved for ASL (see ASL Status Codes section below)
00AD Ready To Boot event
00AE Legacy Boot event
00AF Exit Boot Services event
00B0 Runtime Set Virtual Address MAP Begin
00B1 Runtime Set Virtual Address MAP End
00B2 Legacy Option ROM Initialization
00B3 System Reset
00B4 USB hot plug
00B5 PCI bus hot plug
00B6 Clean-up of NVRAM
00B7 Configuration Reset (reset of NVRAM settings)
00B8– 00BF Reserved for future AMI codes
00C0– 00CF OEM BDS initialization codes
00D0 CPU initialization error
00D1 System Agent initialization error
00D2 PCH initialization error
00D3 Some of the Architectural Protocols are not available
00D4 PCI resource allocation error. Out of Resources
00D5 No Space for Legacy Option ROM
00D6 No Console Output Devices are found
00D7 No Console Input Devices are found
00D8 Invalid password
00D9 Error loading Boot Option (LoadImage returned error)
00DA Boot Option is failed (StartImage returned error)
00DB Flash update is failed
00DC Reset protocol is not available
0000 Passes control to OS Loader(typically INT19h)
ACPI/ASL
Description Note
0001 System is entering S1 sleep state
0002 System is entering S2 sleep state
0003 System is entering S3 sleep state
0004 System is entering S4 sleep state
0005 System is entering S5 sleep state
0010 System is waking up from the S1 sleep state
0020 System is waking up from the S2 sleep state
0030 System is waking up from the S3 sleep state
0040 System is waking up from the S4 sleep state
00AC
System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
00AA
System has transitioned into ACPI mode. Interrupt controller is in APIC mode.