User's Manual
Mach Xtreme
MXD3U133316GQ 16GB ( 4x 4GB ) DS - - - - ●● ●
Mach Xtreme
MXD3V13332GS 2GB SS Mach Xtreme C2S46D30-D313 - - ●● ●
MICRON MT8JTF25664AZ-1G4M1 2GB SS MICRON D9PFJ - - ●● ●
Patriot PSD32G13332 2GB DS Prtriot PM128M8D3BU-15 9 - ●●
RiDATA C304627CB1AG22Fe 2GB DS RiDATA C304627CB1AG22Fe 9 - ●● ●
RiDATA E304459CB1AG32Cf 4GB DS RiDATA E304459CB1AG32Cf 9 - ●● ●
Silicon Power
SP001GBLTU133S02 1GB SS S-POWER 10YT3E5 9 - ●● ●
Silicon Power
SP002GBLTU133V02 2GB SS S-POWER 20YT3NG 9-9-9-24 - ●● ●
Silicon Power
SP004GBLTU133V02 4GB DS S-POWER 20YT3NG 9-9-9-24 - ●● ●
UMAX
84E44G93UM-13BPSYW 4GB SS UMAX U2S96D30TP-13 1333-9-9-9-24 - ●● ●
UMAX
84E48G93UM-13BPSYW 8GB DS UMAX U2S96D30TP-13 1333-9-9-9-24 - ●● ●
4 DIMM Slots
• 1 DIMM: Supports one module inserted in any slot as Single-channel memory configuration
• 2 DIMM: Supports one pair of modules inserted into either the gray slots or the black slots as one pair of Dual-channel memory configuration
• 4 DIMM: Supports 4 modules inserted into both the gray and black slots as two pairs of Dual-channel memory configuration
-When installing total memory of 4GB capacity or more, Windows 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended.
-It is recommended to install the memory modules from the slots for better overclocking capability.
-The default DIMM frequency depends on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate
at a lower frequency than the vendor-marked value.
-Memory module with memory frequency higher than 2133 MHz and its corresponding timing or the loaded XMP Profile is not the JEDEC memory standard. The stability and compatibility of these memory modules depend on the
CPU’s capabilities and other installed devices.
-Always install DIMMs with the same CAS latency. For optimal compatibility, we recommend that you install memory modules of the same version or date code (D/C) from the same vendor. Check with the retailer to get the correct
memory modules.