User Guide

2-34
Chapter 2: Hardware Information
•  TheactualdatatransferratedependsonthespeedofSerialATAharddisks
installed.
•  TheSSATA4[LightGray]willbeautomaticallyturnedoffiftheM.2connector(NGFF)
is occupied.
2.8.2 Internal connectors
1. Serial ATA 6.0 Gbps connectors
(7-pin SATA1, SATA2, SATA3, SATA4, SATA5, SATA6 [Light Blue], SSATA1,
SSATA2, SSATA3 [Gray], SSATA4 [Light Gray])
Supported by the Intel
®
C612seriesChipset,theseconnectorsarefortheSerialATA
signalcablesforSerialATAharddiskdrivesthatallowsupto6Gbpsofdatatransfer
rate.
IfyouinstalledSerialATAharddiskdrives,youcanuseasoftwareRAIDsolutionto
createaRAID0,RAID1,RAID5,oraRAID10conguration.Formoreinformation
ontheSATARAIDsolutionssupportedonthismotherboard,refertothe
RAID
Configuration
chapter of this user guide.