User Guide

2-28
Chapter 2: Hardware Information
2. VGA controller setting (3-pin VGA_SW1)
ThisjumperallowsyoutoenableordisabletheonboardVGAcontroller.Settopins
1–2toactivatetheVGAfeature.
3. LAN controller setting (3-pin LAN_SW1, LAN_SW2, LAN_SW3, LAN_SW4)
ThesejumpersallowyoutoenableordisabletheonboardLAN_SW1,LAN_SW2for
I350-AM2;LAN_SW3,LAN_SW4forX540-BT2orI350-BT2LANcontrollers.Setto
pins1–2toactivatetheGigabitLANfeature.
RefertothetablebelowformoreinformationabouttheLANcontrollersettings:
LAN_SW1,LAN_SW2 LAN_SW3,LAN_SW4
Z10PE-D16/2L/10G-2T forI350-AM2 forX540-BT2
Z10PE-D16/10G-2T — forX540-BT2
Z10PE-D16/4L
forI350-AM2
forI350-BT2
Z10PE-D16 —