User Manual

ASUS Xonar D2/D2X Audio Card

RMAA v6.0.5 Test Guide V.1.2

Again, in the case using a line cable for loop-back test, please set the format for “Line In”

device in the recording page.

3. Configuration and Test with RMAA

Start RMAA and follow the setup procedure below.

1. On Vista, please select the playback device as “[DirectSound] Speakers (ASUS Xonar

D2/D2X Audio Device)” (or [MME] Speakers (ASUS Xonar D2/D2X Audio Device) and

recording device as “[MME] ALT (ASUS Xonar D2/D2X Audio Device)”. On XP, those will

be “[DirectSound] ASUS Xonar D2/D2X Audio Device” for playback and “[MME] ASUS

Xonar D2/D2X Audio Device”. (Please also mind that NOT to select “ASUS Xonar D2/D2X

Audio Converter”, which is for ALT and PMP purpose.)