User Manual

ASUS Xonar D2/D2X Audio Card

RMAA v6.0.5 Test Guide V.1.2

or low level may affect the test authenticity). Begin the test by clicking the “Start test”

button.

If the recorded level is not high enough, please check and make the WAVE and Master

Volume have been at the maximum level; Instead, if the recorded level is too high,

please lower the WAVE and Master volumes gradually until the level is ok. (In case you

cannot get the level to be “OK” after fine-tuning or RMAA may sometimes show some

inter-channel leakage alert, please try to ignore it first and just click “Start test” anyway.

It sometimes happens because RMAA programming rules but it doesn’t necessarily

imply any hardware quality issue.)