E4008 First Edition V1 June 2008 Xonar D1 PCI audio card Quick start guide
1.1 System requirements English To ensure a successful installation of the Xonar D1 audio card, your computer must meet the following requirements: • One PCI compatible slot for the audio card • Microsoft® Windows® Vista/XP(32/64bit)/MCE2005 • Intel® Pentium® 4 1.
Card installation English 1.3 To install the Xonar D1 audio card: 1. Power OFF the computer, the monitor, and all other peripheral devices connected to your computer. 2. Unplug the computer power cord from your computer and power outlet. 3. Touch the metal back or side panel of the computer to avoid static electricity. 4. Remove the chassis cover. 5. Locate an empty PCI slot on the motherboard. 7. Align and insert the audio card into the PCI slot until it seats in place.
1.4 Driver installation English After installing the Xonar D1 audio card on your computer, you need to install the device driver that enables the Xonar D1 audio card to work with Windows operating system. The version and content of the driver CD are subject to change without notice. If you have already installed the ASUS Xonar D1 audio card, the Found New Hardware Wizard window may pop up before or during driver installation. See figure below. 1.4.
Connecting audio device 1.5.1 Back ports English 1.5 SPDIF Out Line / Mic In Front Out Side Surround Center & Subwoofer Back Surround 1.5.
English 2.
English 4.1 Speakers Front Out Side Surround 5.
English 6.1 Speakers Front Out Side Surround Center & Subwoofer Back Surround 7.
Connecting digital speakers English 1.5.3 SPDIF Out Plug the optical TOSLINK adapter into the S/PDIF-Out port. Then, connect your decoder’s S/PDIF In port to the optical adapter with the TOSLINK optical cable. SPDIF Out 1.5.
English 1.5.