User Manual
Table Of Contents
- Notices
- Safety information
- Care & Cleaning
- 1.1 Welcome!
- 1.2 Package Contents
- 1.3 Assembling the Monitor
- 1.4 Connect Cables
- 1.5 Monitor Introduction
- 2.1 Detaching the Stand (for VESA Wall Mount)
- 2.2 Adjusting the Monitor
- 3.1 OSD (On-Screen Display) Menu
- 3.2 Specifications
- 3.3 Outline Dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported Timing List
3-4
Chapter 3: General Instruction
• HDR: High Dynamic Range. Contains several HDR modes.
The HDR mode is selectable when input video is correct HDR
source.
• When detecting HDR content, an “HDR ON” message will pop up. When
displaying HDR content, the following function(s) are not available: ELMB Sync,
Sniper, GameVisual, Shadow Boost, Brightness, Contrast, ASCR, Aspect Control,
Blue Light Filter, Color Temp., Gamma, Saturation.
• VividPixel: ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0 to 100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast
ratio function.
• Aspect Control: Adjusts the aspect ratio to Full and 4:3.
• Select 4:3 to display the picture according to the original aspect ratio of the input
source.
• Blue Light Filter: Reduces the energy level of blue light emitted
from LED backlight. To turn off the Blue Light Filter, select Level 0.
• When Blue Light Filter is activated, the default settings of Racing Mode
will be automatically imported.
• Between Level 1 to Level 3, the Brightness function is user-congurable.
• Level 4 is optimized setting. It is compliance with TUV Low Blue Light
Certication. The Brightness function is not user-congurable.