User Manual

3-56
Chapter 3: BIOS Setup
Chapter 3
The following items appear only when you set the Water Pump Control to [Auto], [PWM
Mode], and [DC Mode].
Water Pump Temperature
Use the <+> and <-> keys to adjust the upper limit of the water pump.
The values range from 45°C to 75°C. The water pump will operate at the
maximum duty cycle when the CPU temperature is higher than the limit.
Water Pump Max. Duty Cycle(%)
Use the <+> and <-> keys to adjust the maximum water pump duty cycle.
The values range from 60% to 100%. When the CPU temperature reaches
the upper limit, the water pump will operate at the maximum duty cycle.
Water Pump Middle Temperature
Use the <+> and <-> keys to adjust the water pump middle temperature.
The values range from 40°C to 75°C.
Water Pump Middle Duty Cycle(%)
Use the <+> or <-> keys to adjust the water pump middle duty cycle. The
values range from 60% to 100%.
Water Pump Lower Temperature
Use the <+> or <-> keys to adjust the lower limit of the water pump
temperature. The values range from 20°C to 75°C. The water pump will
operate at the minimum duty cycle when the CPU temperature is lower
than the limit.
Water Pump Min. Duty Cycle(%)
Use the <+> and <-> keys to adjust the minimum water pump duty cycle.
The values range from 60% to 100%. When the CPU temperature is lower
than the lower limit, the water pump will operate at the minimum duty cycle.
HAMP Fan Control [Auto]
This item allows you to set the HAMP Fan operating mode.
[Auto] Detects the type of HAMP Fan installed and automatically switches the
control modes.
[PWM Mode] Enables the HAMP Fan Control feature in PWM mode for 4-pin HAMP Fan.
[DC Mode] Enables the HAMP Fan Control feature in DC mode for 3-pin HAMP Fan.
[Disabled] Disables the HAMP Fan Control.
The following items appear only when you set the HAMP Fan Q-Fan Control to [Auto],
[PWM Mode], and [DC Mode].