User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Advanced menu
- 4.4.1 CPU Configuration
- 4.4.2 Power & Performance
- 4.4.3 Server ME Configuration
- 4.4.4 Trusted Computing
- 4.4.5 APM Configuration
- 4.4.6 Runtime Error Logging Settings
- 4.4.7 Onboard LAN Configuration
- 4.4.8 Serial Port Console Redirection
- 4.4.9 Intel TXT Information
- 4.4.10 PCI Subsystem Settings
- 4.4.11 USB Configuration
- 4.4.12 Network Stack Configuration
- 4.4.13 CSM Configuration
- 4.4.14 NVMe Configuration
- 4.4.15 WHEA Configuration
- 4.4.16 iSCSI Configuration
- 4.4.17 Tls Auth Configuration
- 4.5 Chipset menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Monitor menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
Chapter 2: Hardware Information
2-18
2.7 Expansion cards
The system has expansion slots on the rear panel that allows you to install expansion cards
or additional components.
Ensure to unplug the power cord before installing or removing expansion cards. Failure to
do so may cause severe damage to the motherboard and other system components!
Read the documentation of the expansion card and make the necessary hardware settings
for the card before installing them.
2.7.1 Installing an expansion card
To install an expansion card:
1. Laythesystemonitssideonaat,stablesurface.
2. Press the PCI-E latch (A), hold it by its edge then lift it towards the rear (B).
3. Remove the screw (A) that secures
the metal bracket to the chassis then
remove the metal bracket (B).
Metal bracket
PCI-E latch
Edge of the PCI-E latch
Screw