User Manual

4-6
Chapter 4: RAID Congurations
Chapter 4
4.1.4 Intel
®
VirtualRaidonCPUinUEFIBIOS
This feature requires a KEY module to enable CPU RAID functions with Intel
®
CPU RSTe.
• The KEY module is purchased separately.
• The HYPER M.2 X16 Card is purchased separately.
• Due to CPU behavior, CPU RAID functions with Intel
®
CPU RSTe only supports Intel
®
Core™ X-series Processors (6-core or above) and Intel
®
SSD modules.
• Refer to section 1.1.9Internalconnectors for the location of the VROC_HW_KEY
connector.
If you plan on using the CPU RAID conguration spanned across different PCIE slots as
OS drives. Please install the Hyper M.2 X16 Cards to PCIEX16_3 and PCIEX16_4 slots.
To enter the Intel
®
Virtual Raid on CPU in UEFI BIOS:
1. Enter the BIOS Setup during POST.
2. Go to the Boot menu > CSM(CompatibilitySupportModule)> LaunchCSM, then
set the item to [Disabled].
3. Go to the Advanced menu > CPU Storage Conguration, then set the PCIE slot(s) that
you have installed the Hyper M.2 X16 Card(s) or PCIE X4 SSD Card(s) to Hyper M.2
X16 or PCIE X4 SSD Card correspondingly.
4. Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
5. Go to the Advanced menu > Intel(R)VirtualRaidonCPU> AllIntelVMD
Controllers, then press <Enter> to display the Intel
®
Virtual Raid on CPU menu.
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.