User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Ai Tweaker menu
- 3.5 Performance Tuning menu
- 3.6 Advanced menu
- 3.5.1 Trusted Computing
- 3.5.2 ACPI Settings
- 3.5.3 SMART Self Test
- 3.5.4 Super IO Configuration
- 3.5.5 Serial Port Console Redirection
- 3.5.6 Onboard LAN Configuration
- 3.5.7 APM
- 3.5.8 PCI Subsystem Settings
- 3.5.9 Network Stack Configuration
- 3.5.10 CSM Configuration
- 3.5.11 NVMe Configuration
- 3.5.12 USB Configuration
- 3.5.13 iSCSI Configuration
- 3.5.14 Intel(R) Virtual RAID on CPU
- 3.6 Platform Configuration menu
- 3.7 Socket Configuration menu
- 3.8 Event Logs menu
- 3.9 Server Mgmt menu
- 3.10 Monitor menu
- 3.11 Security menu
- 3.12 Boot menu
- 3.13 Tool menu
- 3.14 Save & Exit menu
- Chapter 4: RAID Support
- Chapter 5: Multi GPU Support
- Appendix
ASUS WS C621E SAGE
4-13
Chapter 4
6. Conrm the volume creation, than click Create Volume to continue.
This process could take a while depending on the number and size of the disks. You can
continue using other applications during this time.
7. Wait until the process is completed, then click OK when prompted.
You still need to partition your new volume using Windows Disk Management before
adding any data.
The RAID set is displayed in the Volumes list and you can change the settings in Volume
Properties.