User Manual

3-14
Chapter 3: BIOS Setup
Chapter 3
3.7.1 PCH Configuration
WhileenteringSetup,theBIOSautomaticallydetectsthepresenceofSATAdevices.The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
PCH SATA Configuration
SATA Controller
Allows you to enable or disable the SATA Controller.
Congurationoptions:[Disabled][Enabled]
The following item appears only when you set SATA Controller to [Enabled].
Configure SATA as
AllowsyoutoidentifytheSATAportconnectedtoSolidStateDriveorHardDiskDrive.
Congurationoptions:[AHCI][RAID]
Support Aggressive Link Power Management
AllowsyoutoenableordisabletheSupportAggressiveLinkPower(SALP)
Management.
Congurationoptions:[Disabled][Enabled]
SATA Port 0-7
Port 0-7
Allows you to enable or disable the SATA port.
Congurationoptions:[Disabled][Enabled]
3.7 Platform Configuration menu
The IntelRCSetup menu items allow you to change the platform settings.
TakecautionwhenchangingthesettingsofthePlatformCongurationmenuitems.
Incorrecteldvaluescancausethesystemtomalfunction.
3.7.2 Miscellaneous Configuration
Active Video
Allows you to select the video type.
Congurationoptions:[OnboardDevice][OffboardDevice]
3.7.3 Server ME Configuration
Displays the Server ME Technology parameters on your system.
3.7.4 Runtime Error Logging
DisplaysthesystemerrorsandalsoallowsyoutoconguretheWHEAsettingsonyour
system.