User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Ai Tweaker menu
- 3.5 Performance Tuning menu
- 3.6 Advanced menu
- 3.5.1 Trusted Computing
- 3.5.2 ACPI Settings
- 3.5.3 SMART Self Test
- 3.5.4 Super IO Configuration
- 3.5.5 Serial Port Console Redirection
- 3.5.6 Onboard LAN Configuration
- 3.5.7 APM
- 3.5.8 PCI Subsystem Settings
- 3.5.9 Network Stack Configuration
- 3.5.10 CSM Configuration
- 3.5.11 NVMe Configuration
- 3.5.12 USB Configuration
- 3.5.13 iSCSI Configuration
- 3.5.14 Intel(R) Virtual RAID on CPU
- 3.6 Platform Configuration menu
- 3.7 Socket Configuration menu
- 3.8 Event Logs menu
- 3.9 Server Mgmt menu
- 3.10 Monitor menu
- 3.11 Security menu
- 3.12 Boot menu
- 3.13 Tool menu
- 3.14 Save & Exit menu
- Chapter 4: RAID Support
- Chapter 5: Multi GPU Support
- Appendix
ASUS WS C621E SAGE
3-3
Chapter 3
• ThisfunctioncansupportdevicessuchasaUSBashdiskwithFAT32/16formatand
single partition only.
• DONOTshutdownorresetthesystemwhileupdatingtheBIOStopreventsystem
boot failure!
3.1.3 BUPDATER utility
The succeeding BIOS screens are for reference only. The actual BIOS screen displays
may not be the same as shown.
TheBUPDATERutilityallowsyoutoupdatetheBIOSleinDOSenvironmentusinga
bootableUSBashdiskdrivewiththeupdatedBIOSle.
Updating the BIOS file
ToupdatetheBIOSleusingtheBUPDATERutility:
1. VisittheASUSwebsiteatwww.asus.comanddownloadthelatestBIOSleforthe
motherboard.SavetheBIOSletoabootableUSBashdiskdrive.
2. Download the BUPDATER utility (BUPDATER.exe) from the ASUS support website at
support.asus.comtothebootableUSBashdiskdriveyoucreatedearlier.
3. Boot the system in DOS mode, then at the prompt, type:
BUPDATER/i[lename].CAP
where[lename]isthelatestortheoriginalBIOSleonthebootableUSBashdisk
drive, then press <Enter>.
A:\>BUPDATER /i[le name]CAP
Ensure to load the BIOS default settings to ensure system compatibility and stability. Press
<F5> and select Yes to load the BIOS default settings.