User Manual

1-14
Chapter 1: Product Introduction
Chapter 1
8. VGA controller setting (3-pin VGA_SW1)
ThisjumperallowsyoutoenableordisabletheonboardVGAcontroller.Settopins
1–2toactivatetheVGAfeature.
• IfaVGACardisinstalledintoaPCIExpressx16Slot,theonboardVGAfunctionwill
stillbeenabled.
• BMCRemoteManagementFunctionwillstillbeavailablewhenVGAcontroller
settingsissettodisabled,butthedisplaywillbedisabledontheclientdevice.
EnsuretheATXpowersupplyisswitchedofforthepowercordisdetachedfromthepower
supplywhenenablingordisablingtheVGAcontrollersettingsusingthisjumper.