User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Ai Tweaker menu
- 3.5 Performance Tuning menu
- 3.6 Advanced menu
- 3.5.1 Trusted Computing
- 3.5.2 ACPI Settings
- 3.5.3 SMART Self Test
- 3.5.4 Super IO Configuration
- 3.5.5 Serial Port Console Redirection
- 3.5.6 Onboard LAN Configuration
- 3.5.7 APM
- 3.5.8 PCI Subsystem Settings
- 3.5.9 Network Stack Configuration
- 3.5.10 CSM Configuration
- 3.5.11 NVMe Configuration
- 3.5.12 USB Configuration
- 3.5.13 iSCSI Configuration
- 3.5.14 Intel(R) Virtual RAID on CPU
- 3.6 Platform Configuration menu
- 3.7 Socket Configuration menu
- 3.8 Event Logs menu
- 3.9 Server Mgmt menu
- 3.10 Monitor menu
- 3.11 Security menu
- 3.12 Boot menu
- 3.13 Tool menu
- 3.14 Save & Exit menu
- Chapter 4: RAID Support
- Chapter 5: Multi GPU Support
- Appendix
4-22
Chapter 4: RAID Congurations
Chapter 4
4. A message appears, reminding you to insert the installation media containing the driver
of the RAID controller driver. If you have only one optical drive installed in your system,
eject the Windows OS installation disc and replace with the motherboard Support DVD
into the optical drive. Click
Browse
to continue.
5. Locate the driver in the corresponding folder of the support DVD then click
OK
to
continue.
6. Select the RAID controller driver you need from the list and click Next.
7. When the system nishes loading the RAID driver, replace the motherboard Support
DVD with the Windows Server installation disc. Select the drive to install Windows and
click
Next
.
8. Setup then proceeds with the OS installation. Follow screen instructions to continue.