User Manual

3-16
Chapter 3: BIOS Setup
Chapter 3
The following items appears only when you set ErP to [Disabled].
Restore AC Power Loss [Last State]
Whensetto[PowerOff],thesystemgoesintooffstateafteranACpowerloss.Whensetto
[Power On],thesystemwillrebootafteranACpowerloss.Whensetto[Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss.
Congurationoptions:[PowerOff][PowerOn][LastState]
Power On By PCIE/PCI [Disabled]
[Disabled] DisablesthePCIorPCIEdevicestogenerateawakeevent.
[Enabled] EnablesthePCIorPCIEdevicestogenerateawakeevent.
Power On By RTC [Disabled]
[Disabled] DisablesRTCtogenerateawakeevent.
[Enabled] Whensetto[Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Secondwillbecomeuser-congurablewithsetvalues.
Runtime Error Logging System Enabling [Enabled]
This item allows you to enable or disable Runtime Error Logging System.
Congurationoptions:[Disabled][Enabled]
3.4.7 Runtime Error Logging Settings
3.4.8 Onboard LAN Configuration
Onboard I210 LAN Configuration
Intel I210 LAN1
LAN Enable [Enabled]
Allows you to enable or disable the Intel LAN.
Congurationoptions:[Disabled][Enabled]
The following item appears only when you set LAN Enable to [Enabled].