User Manual

1-16
Chapter 1: Product Introduction
Chapter 1
1.1.9 Internal connectors
1. Intel
®
Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-8)
TheseconnectorsconnecttoSerialATA6Gb/sharddiskdrivesviaSerialATA6Gb/s
signalcables.
IfyouinstalledSerialATAharddiskdrives,youcancreateaRAID0,1,5,and10
congurationwiththeIntel
®
RapidStorageTechnologyenterprisethroughtheonboard
Intel
®
C246chipset.
Theseconnectorsaresetto[AHCI]bydefault.IfyouintendtocreateaSerialATARAIDset
usingtheseconnectors,settheSATAModeitemintheBIOSto[RAID].