User Manual
4-8
Chapter 4: RAID Congurations
Chapter 4
4.4 Intel
®
Rapid Storage Technology (Windows)
The Intel
®
Rapid Storage Technology allows you to create RAID 0, RAID 1, RAID 10 (RAID
1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA
connectors supported by the Southbridge.
You can click Rescan to re-scan any attached hard disks.
1. Turn on the system and go to the windows desktop.
2. Click the Intel
®
Rapid Storage Technology icon to display the main menu.
Your storage system is configured for data protection, increased performance and
optimal data storage capacity. You can create additional volumes to further optimize
your storage system.
To enter the Intel
®
Rapid Storage Technology utility under Windows operating system:
You need to manually install the Intel
®
Rapid Storage Technology utility on a Windows
®
operating system.