User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Advanced menu
- 3.4.1 CPU Configuration
- 3.4.2 Power & Performance
- 3.4.3 Server ME Configuration
- 3.4.4 Trusted Computing
- 3.4.5 ACPI Settings
- 3.4.6 APM Configuration
- 3.4.7 Runtime Error Logging Settings
- 3.4.8 Onboard LAN Configuration
- 3.4.9 Serial Port Console Redirection
- 3.4.10 Intel TXT Information
- 3.4.11 PCI Subsystem Settings
- 3.4.12 USB Configuration
- 3.4.13 Network Stack Configuration
- 3.4.14 CSM Configuration
- 3.4.15 NVMe Configuration
- 3.4.16 WHEA Configuration
- 3.4.17 Tls Auth Configuration
- 3.4.18 iSCSI Configuration
- 3.5 Chipset menu
- 3.6 Security menu
- 3.7 Boot menu
- 3.8 Monitor menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Save & Exit menu
- Chapter 4: RAID Support
- Appendix
ASUS WS C246M PRO/SE
3-37
Chapter 3
3.8 Monitor menu
This menu displays the system temperature, fan speed, and power status. You can also
change the fan settings in this menu.
Fan Speed Control [Generic Mode]
Allowsyoutoselectthepower-onstatefortheNumLock.
Congurationoptions:[AutoMode][FullSpeedMode][ManualSpeedMode]
The following items appear only when you set Fan Speed Control to [Manual Speed
Mode].
REAR_FAN1 / CPU_FAN1 / FRNT_FAN1-3 Duty% [50]
Allows you to set the desired POST Report waiting time from 1 to 10 seconds. Use the
<+> or <-> to adjust the value. The values range from 10 to 100.
3.9 Tool menu
ASUS EZ Flash
Allows you to run ASUS EZ Flash BIOS ROM Utility when you press <Enter>. Refer to the
ASUS EZ Flash Utility section for details.