User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Advanced menu
- 3.4.1 CPU Configuration
- 3.4.2 Power & Performance
- 3.4.3 Server ME Configuration
- 3.4.4 Trusted Computing
- 3.4.5 ACPI Settings
- 3.4.6 APM Configuration
- 3.4.7 Runtime Error Logging Settings
- 3.4.8 Onboard LAN Configuration
- 3.4.9 Serial Port Console Redirection
- 3.4.10 Intel TXT Information
- 3.4.11 PCI Subsystem Settings
- 3.4.12 USB Configuration
- 3.4.13 Network Stack Configuration
- 3.4.14 CSM Configuration
- 3.4.15 NVMe Configuration
- 3.4.16 WHEA Configuration
- 3.4.17 Tls Auth Configuration
- 3.4.18 iSCSI Configuration
- 3.5 Chipset menu
- 3.6 Security menu
- 3.7 Boot menu
- 3.8 Monitor menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Save & Exit menu
- Chapter 4: RAID Support
- Appendix
ASUS WS C246M PRO/SE
3-21
Chapter 3
3.4.12 USB Configuration
Legacy USB Support [Enabled]
[Disabled] TheUSBdevicescanbeusedonlyfortheBIOSsetupprogram.Itcannot
be recognized in boot devices list.
[Enabled] EnablesthesupportforUSBdevicesonlegacyoperatingsystems(OS).
[Auto] AllowsthesystemtodetectthepresenceofUSBdevicesatstartup.If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
XHCI Hand-off [Enabled]
AllowsyoutoenableordisableworkaroundforOS(s)withoutXHCIhand-offsupport.
Congurationoptions:[Disabled][Enabled]
USB Mass Storage Driver Support [Enabled]
Allows you to enable or disable USB Mass Storage driver support.
Congurationoptions:[Disabled][Enabled]
Port 60/64 Emulation [Enabled]
Allows you to enable or disable Port 60/64 Emulation.
Congurationoptions:[Disabled][Enabled]
USB hardware delays and time-outs
USB transfer time-out [20 sec]
Allows you to set the USB transfer time-out value.
Congurationoptions:[1sec][5sec][10sec][20sec]
Device reset time-out [20 sec]
Allows you to set the device reset time-out value.
Congurationoptions:[10sec]20sec][30sec][40sec]