User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Advanced menu
- 3.4.1 CPU Configuration
- 3.4.2 Power & Performance
- 3.4.3 Server ME Configuration
- 3.4.4 Trusted Computing
- 3.4.5 ACPI Settings
- 3.4.6 APM Configuration
- 3.4.7 Runtime Error Logging Settings
- 3.4.8 Onboard LAN Configuration
- 3.4.9 Serial Port Console Redirection
- 3.4.10 Intel TXT Information
- 3.4.11 PCI Subsystem Settings
- 3.4.12 USB Configuration
- 3.4.13 Network Stack Configuration
- 3.4.14 CSM Configuration
- 3.4.15 NVMe Configuration
- 3.4.16 WHEA Configuration
- 3.4.17 Tls Auth Configuration
- 3.4.18 iSCSI Configuration
- 3.5 Chipset menu
- 3.6 Security menu
- 3.7 Boot menu
- 3.8 Monitor menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Save & Exit menu
- Chapter 4: RAID Support
- Appendix
ASUS WS C246M PRO/SE
3-3
Chapter 3
• ThisfunctioncansupportdevicessuchasaUSBashdiskwithFAT32/16formatand
single partition only.
• DONOTshutdownorresetthesystemwhileupdatingtheBIOStopreventsystem
boot failure!
3.1.3 BUPDATER utility
The succeeding BIOS screens are for reference only. The actual BIOS screen displays
may not be the same as shown.
TheBUPDATERutilityallowsyoutoupdatetheBIOSleinDOSenvironmentusinga
bootableUSBashdiskdrivewiththeupdatedBIOSle.
Updating the BIOS file
ToupdatetheBIOSleusingtheBUPDATERutility:
1. VisittheASUSwebsiteatwww.asus.comanddownloadthelatestBIOSleforthe
motherboard.SavetheBIOSletoabootableUSBashdiskdrive.
2. Download the BUPDATER utility (BUPDATER.exe) from the ASUS support website at
support.asus.comtothebootableUSBashdiskdriveyoucreatedearlier.
3. Boot the system in DOS mode, then at the prompt, type:
BUPDATER/i[lename].CAP
where[lename]isthelatestortheoriginalBIOSleonthebootableUSBashdisk
drive, then press <Enter>.
A:\>BUPDATER /i[le name]CAP
Ensure to load the BIOS default settings to ensure system compatibility and stability. Press
<F5> and select Yes to load the BIOS default settings.