User Manual

1-26
Chapter 1: Product Introduction
Chapter 1
14. ATX power connectors (24-pin EATXPWR1; 8-pin EATX12V1)
TheseconnectorsareforATXpowersupplyplugs.Thepowersupplyplugsare
designedtottheseconnectorsinonlyoneorientation.Findtheproperorientationand
pushdownrmlyuntiltheconnectorscompletelyt.
15. Serial General Purpose Input/Output connector (6-1 pin SGPIO1)
TheSGPIO1connectorisusedfortheIntelRapidStorageTechnologyEnterprise
SGPIOinterfacethatcontrolstheLEDpatterngeneration,deviceinformation,and
generalpurposedata.
Ensuretoconnectthe8-pinpowerplug.
• Forafullyconguredsystem,werecommendthatyouuseapowersupplyunit
(PSU)thatcomplieswithATX12VSpecication2.0(orlaterversion)andprovidesa
minimumpowerof350W.
• DONOTforgettoconnectthe8-pinEATX12V1powerplug.Otherwise,thesystem
willnotboot.
• WerecommendthatyouuseaPSUwithahigherpoweroutputwhenconguringa
systemwithmorepower-consumingdevices.Thesystemmaybecomeunstableor
maynotbootupifthepowerisinadequate.