User guide
WL-600g All-in-1 Wireless ADSL2/2+ Home Gateway Quick Start Guide
7
Nederlan EnglishEspañol
Русский
RomânăItalianoPortuguêsFrançais
Quick setup
Before you start
With Quick setup, you need to set up ADSL link rst then wireless setup. Depending on
your ISP's requirements, you may need to acquire some of the information listed below
to set up Internet connection on WL-600g.
• Virtual Path Identifier (VPI)
• Virtual Channel Identifier (VCI)
• Host name
• ISP logiin username and password
• ISP Domain Name System (DNS) server address
• Static IP address (For static IP subscribers)
Login to the WL-600g conguration page
1. Input
192.168.1.1
into the URL of your Web browser and press
Enter
.
2. A login window appears for user name and password. The default username is
admin
, password is
admin
(in lower case).
3. After logging in, you can see the WL-600g conguration page.
ADSL setup
1. By default, the Quick Setup page pops up. The Quick Setup Wizard automatically
detects your ADSL connection type.
2. If ADSL connection is detected, the next page shows your ADSL connection type
(PPPoE/PPPoA or MER).
If your ADSL connection is not detected, click
Manual Setting
to manually
set up WL-600g. Refer to Page 9-11 for manual setting instructions.
Quick Setup