User Guide

WL-520g Quick Start Guide
8
English
Aftersettingtheconnectiontype,youare
tosetupyourwirelessinterface,.First,give
anSSID(ServiceSetIdentier),whichisa
uniqueidentifierattachedtopacketssent
overWLANs.Thisidentifieremulatesa
passwordwhenawirelessdeviceattempts
communicationontheWLAN.Because
anSSIDdistinguishesWLANsfromeach
other,accesspointsandwirelessdevices
tryingtoconnecttoaWLANmustusethesameSSID.
Also,ifyouwanttoprotecttransmitteddata,selectamiddleorhighSecurityLevel.
Medium :
onlyuserswiththesameWEPkeyaretoconnecttothisaccesspointand
to transmit data using 64bits or 128bits WEP key encryption.
High:
onlyuserswiththesameWPApre-sharedkeyaretoconnecttothisaccess
pointandtotransmitdatausingTKIPencryption.
TheASUSwirelessrouterconfigurationpagefeaturesaconvienientapproachto
setuptheWEPKeys:withonlyafewtapsonyourkeyboardtodenethePassphrase,
thesystemwillautomaticallygeneratefourstringsofWEPKeys.ForASUSwireless
adaptorusers,itisno longernecessarytoinputlong andcomplicatedWEPKeys
whenconnectingtherouterwiththewirelessclient;thePassphraseprovidesaneasy
wayforsettingupyourwirelessenvironment!
For example, if we input select WEP-
64bits encryption mode, input 11111 as
Passphrase,thenthefollowingWEPKeys
aregeneratedasshownintherightpicture.
RecordthePassphraseandtheWEPkeys
onyournotebook,thenclickSave.
Click
Finish
to continue. You are prompted
tosavethesettings.Click
Save&Restart
tosavethesettingstotheASUSWireless
Routerandenablethenewsettings.
Next we are to setup encrypted wireless connection for wireless router and wireless
client.IfyouhaveinstalledASUSwirelessadaptoraswellastheutility,click
Start
->
Programes
->
ASUS Utility
->
WLAN Card
->
One Touch Wizard
toopenthe
connectionsetuputilityontheclientend.
5
3
4
2