October 2010 VW248TLB Series LED Monitor User Guide Downloaded from ManualMonitor.
Table of contents Notices.......................................................................................................... iii Safety information....................................................................................... iv Care & Cleaning............................................................................................ v 1.1 Welcome!......................................................................................... vi 1.2 Package contents.............................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
When the monitor enters energy saving (standby) mode, the screen will display blank and the backlight will be turned off, and the Power LED will light “amber”. For the indication of Energy Saving (standby) mode, please refer to your user guide. Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package. 1.
1.3 Assembling the monitor base To assemble the monitor base: 1. Place the display flat on a cloth on the table, assemble the base according to the drawing and use a coin to turn the screw tight. 2. Adjust the monitor to the angle that is most comfortable for you. • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 1 2 90 90 ASUS LEDfrom Monitor VW248TLB Series Downloaded ManualMonitor.
1.4 Monitor introduction 1.4.1 Front of the LED monitor 1 1. 3 4 5 6 7 Button: • Automatically adjust the image to its optimized position, clock, and phase by long pressing this button for 2-4 seconds (for VGA mode only). • Use this hotkey to switch from six video preset modes (Scenery Mode, Standard Mode, Theater Mode, Game Mode, Night View Mode, and sRGB Mode) with SPLENDID™ Video Intelligence Technology. • Exit the OSD menu or go back to the previous menu as the OSD menu is active.
6. Power Button: • 7. Press this button to turn the monitor on/off. Power Indicator Status Blue Amber OFF 1.4.2 Description ON Standby mode OFF Rear of the LED monitor Screw holes for VESA Wall Mount 1 2 1 AC-IN port 2 Line-in port 3 DVI port 4 VGA port 5 USB upstream 6 USB downstream x 2 ASUS LEDfrom Monitor VW248TLB Series Downloaded ManualMonitor.
2.1 Detaching the arm/stand (for VESA wall mount) The detachable stand of the VW248TLB Series LED monitor is specially designed for VESA wall mount. To detach the arm/stand: 1. Lower the monitor to its lowest height, and then inset the monitor height adjustment lock. 2. Have the front of the monitor face down on a table. 3. Use a screwdriver to remove the two screws on the VESA cover,the slide out the arm/base to detach it from themonitor.
2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling while changing its angle. • You can tilt the monitor’s from -5º to 15º, swivel from left-to-right for 45º each side, and lift the monitor’s height for about 110 mm. 110mm -5º~15º 45º 45 º 0º 2-2 Downloaded from ManualMonitor.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure VW248 Splendid Scenery Mode Color Standard Mode Image Theater Mode Input Select Game Mode System Setup Night View Mode sRGB Move Menu Exit 1. Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions.
• Standard Mode: This is the best choice for document editing with SPLENDID™ Video Intelligence Technology. • Theater Mode: This is the best choice for movie watching with SPLENDID™ Video Intelligence Technology. • Game Mode: This is the best choice for game playing with SPLENDID™ Video Intelligence Technology. • Night View Mode: This is the best choice for playing dark-scene game or watching dark-scene movie with SPLENDID™ Video Intelligence Technology. • sRGB 2.
3. Image You can adjust the image Sharpness, Aspect Control, ASCR, Position (VGA only), and Focus (VGA only) from this main function. VW248 Splendid Sharpness Color Aspect Control Full Image ASCR OFF Input Select Position System Setup Focus Move 4. Menu 50 Exit • Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100. • Aspect Control: Adjust the aspect ratio to “Full”, “4:3”. • ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.
5. System Setup Adjust the system configuration. VW248 Splendid Splendid Demo Mode Color Volume Image ECO Mode Input Select OSD Setup System Setup Language OFF 50 OFF English Information 1/2 Move Menu Exit VW248 Splendid All Reset Color Image Input Select System Setup 2/2 Move Menu Exit • Splendid Demo Mode: Activate the demo mode for the Splendid function. • Volume: The adjusting range is from 0 to 100. activate this function.
3.2 Specifications summary Model Panel Size VW248TLB 24”W (61.0 cm) True Resolution 1920x1080 (Full HD) Brightness (Typ.) 250 cd/m2 Contrast Ratio (Typ.) 1000:1 ASUS Smart Contrast Ratio (ASCR) 10000000:1 Viewing Angle (CR≥10) 170°(H)/160°(V) Color Saturation (NTSC) 68% Display Colors 16.7 M Response Time 5ms (On/Off) Power Consumption ON Mode: <42W, Standby Mode: <0.3W, Off Mode: <0.
3.3 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and • Check if the monitor and the computer are in the there is no screen image ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the pins are bent.
3.4 Supported Timing List Resolution Refresh Rate Horizontal Frequency 640x480 640x480 640x480 640x480 640x350 720x400 800x600 800x600 800x600 832x624 848x480 1024x768 1024x768 1024x768 1152x864 1280x720 1280x800 1280x960 1280x1024 1280x1024 1366x768 1440x900 1680x1050 1680x1050 1920x1080 1920x1080 60Hz 72Hz 75Hz 67Hz 70Hz 70Hz 56Hz 60Hz 75Hz 75Hz 60Hz 60Hz 70Hz 75Hz 75Hz 60Hz 60Hz 60Hz 60Hz 75Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 31.469 kHz 37.861 kHz 37.5 kHz 35 kHz 31.469 kHz 31.469 kHz 35.156 kHz 37.
