E2682 V1 July 2006 VW192 Series LCD Monitor User Guide Downloaded from ManualMonitor.
Table of contents Notices ................................................................................................ iii Safety information .............................................................................. iv Care & Cleaning .................................................................................... v Chapter 1: Product introduction 1.1 Welcome! .............................................................................. 1-1 1.2 Package contents ..........................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation, such as warranty card, that may have been added by your dealer. These documents are not part of the standard package. vi Downloaded from ManualMonitor.
1.1 Welcome! Thank you for purchasing the ASUS® VW192 Series LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the VW192 Series brings you! 1.
1.3 Assembling the monitor base To assemble the monitor base: 1. Connect the base with the monitor. A click shows that the base has been connected successfully. 2. Tighten the screw as the drawing shows to fix the base. 3. Adjust the monitor to the angle that is most comfortable for you. • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. screw 1 1-2 Downloaded from ManualMonitor.
1.4 Monitor introduction 1.4.1 Front of the LCD monitor Base 1 1. 3 4 5 6 SPLENDID Button: • • • 2. • • 3. 2 Use this hotkey to switch from five video preset modes (Game Mode, Night View Mode, Scenery Mode, Standard Mode, Theater Mode) with SPLENDID™ Video Enhancement Technology. Exit the OSD menu or go back to the previous menu as the OSD menu is active. Automatically adjust the image to its optimized position, clock, and phase by pressing this button for 2-4 seconds.
5. Power button • Press this button to turn the monitor on/off. 6. Power indicator • The color definition of the power indicator is as the below table. Status 1.4.2 Description Blue ON Amber Standby mode OFF OFF Rear of the LCD monitor Rear connectors Rear connectors (from left to right) 1. 2. P W R p o r t . This port connects the power connector from the bundled power cord. D V I p o r t . This 24-pin port is for PC (Personal Computer) DVI-D digital signal connection.
2.1 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from -5º to 20º. -5º~20º ASUS LCD Monitor VW192 Series Downloaded from ManualMonitor.
2.2 Detaching the arm/stand (for VESA wall mount) The detachable stand of the VW192 Series LCD monitor is specially designed for VESA wall mount. To detach the arm/stand: 1. Remove the rear cover. 2. Have the front of the monitor face down on a table. 3. Use a screwdriver to remove the two screws on the stand of the monitor as the below drawing shows. 4. Two other screws show after you remove the screws on the stand. Repeat step 3.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure 1. Press the MENU button to activate the OSD menu. 2. Press and to navigate through the functions. Highlight and activate the desired function by pressing the MENU button. If the function selected has a sub-menu, press + and - again to navigate through the sub-menu functions. Highlight and activate the desired sub-menu function by pressing the MENU button. 3. Press 4. To exit the OSD menu, press the SPLENDID button.
Image You can adjust brightness, contrast, sharpness, saturation,position (VGA only), and focus (VGA only) from this main function. 2. • • • • • • Brightness: the adjusting range is from 0 to 100. hotkey to activate this function. Contrast: the adjusting range is from 0 to 100. is a Sharpness: the adjusting range is from 0 to 100. Saturation: the adjusting range is from 0 to 100. Position: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the image.
nput Select In In this function, you can select 4. either VGA or DVI input source. (For the models with a DVI port) System Setup Allow you to adjust the system. 5. • V o l u m e : the adjusting range is from 0 to 100. activate this function. • OSD Setup: adjusts the horizontal postition (H-Position) and the vertical position (V-Position) of the OSD. The adjusting range is from 0 to 100. In the OSD Timeout selection, you can adjust the OSD timeout from 10 to 120.
3.2 Troubleshooting (FAQ) Possible Solution Problem Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The Power LED lights amber and there is no screen image • Check if the monitor and the computer are in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the pins are bent.
3.3 Supported operating modes Standard Resolution Horizontal Frequency Vertical Frequency Pixel Frequency DOS 720 x 400 31.47KHz 70Hz 28.32MHz VGA 640 x 480 31.47KHz 60Hz 25.18MHz 640 x 480 37.90KHz 72Hz 31.50MHz 640 x 480 37.50KHz 75Hz 31.50MHz 800 x 600 35.16KHz 56Hz 36.00MHz 800 x 600 37.90KHz 60Hz 40.00MHz 800 x 600 48.10KHz 72Hz 50.00MHz 800 x 600 46.90KHz 75Hz 49.50MHz 1024 x 768 48.40KHz 60Hz 65.00MHz 1024 x 768 56.50KHz 70Hz 75.00MHz 1024 x 768 60.
3-6 Downloaded from ManualMonitor.
