User Manual

2-1
ASUS LCD Monitor VP2
78
Series
2.1 Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Useyourngerstoloosenthescrewlocatedatthebottomofthe
base,and remove the base from the stand.And then remove the hinge
coverfrommonitorbodybyusingyourngers.
3. Use a screwdriver to remove the four screw on the arm and then
detach the arm/stand from the monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand of the monitor while removing the screws.
2
1