User Guide

2-3ASUS VK248 Series LCD Monitor
2.3 Detaching the arm/base (for VESA
wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Remove the rubbers in the four screw holes. (Figure 1)
3. Use a screwdriver to remove the four screws on the arm (Figure 2), then slide
out the arm/base to detach it from the monitor (Figure 2).
1
2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
(Figure 1)
(Figure 2)