User Manual

VivoMini V Series Barebone
23
5. Slide the top cover towards the rear of VivoMini until it is
detached from the chassis.
6. Remove the cover and set it aside.
7. CarefullyslidetheDualBayadapterfromtheSATAconnector,
then remove it from the drive bay.
NOTE:
• TheVivoMinibareboneisshippedwithanemptyDualBayadapter
by default. If you wish to replace the DualBay adapter with a 3.5-
inch HDD, refer to the section Installing a 3.5-inch HDD for more
information.
• TheVivoDualBayadapterinthismanualisforreferenceonly.