VivoMini VM45 User Manual
E13080 First Edition June 2017 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents About this manual.............................................................................................. 4 Conventions used in this manual................................................................ 4 Typography.......................................................................................................... 4 Package contents................................................................................................ 5 Getting to know your VivoMini Features.................
About this manual This manual provides information about the hardware and software features of your PC, organized through the following chapters: Chapter 1: Getting to know your VivoMini This chapter details the hardware components of your VivoMini. Chapter 2: Using your VivoMini This chapter provides you with information on using your VivoMini. Chapter 3: Memory upgrade This chapter provides you with information on how to upgrade the memory modules of your VivoMini.
Package contents Your VivoMini package contains the following items: AC power adapter* VivoMini VM45 Technical documentations Power cable* NOTES: • *Actual product specifications and package contents may vary with your VivoMini’s model type or with country or region. • If the device or its components fail or malfunction during normal and proper use within the warranty period, bring the warranty card to the ASUS Service Center for replacement of the defective components.
VivoMini VM45
1 Getting to know your VivoMini
Features Front panel Top cover The removable top cover allows you access to the hard disk drive and the memory modules. IMPORTANT! Before removing the top cover, turn off your VivoMini and unplug the power cable. Audio speakers Your VivoMini uses SonicMaster technology to provide hi-fi sound quality, with richer bass sounds, straight from the built-in audio speakers. Drive activity indicator This indicator lights up when your VivoMini is accessing the internal storage drive.
Left side Air vents The air vents on the left side allow cooler air to enter your VivoMini chassis. IMPORTANT! For optimum heat dissipation and air ventilation, ensure that the air vents are free from obstructions.
Rear panel Power button The power button allows you to turn the VivoMini on or off. You can also press the power button once to put your VivoMini to sleep mode. Memory card slot The built-in memory card reader enables your VivoMini to read and write data to and from MMC/SD/SDHC/SDXC cards. Top cover lock latch + Kensington security slot The top cover lock latch fastens the top cover on your VivoMini. The Kensington security slot allows you to secure your VivoMini using Kensington® security products.
DisplayPort port Use this port to connect your VivoMini to a DisplayPort or VGA, DVI, or HDMI external display. LAN port The 8-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network. Headphone/Audio Out jack The stereo headphone jack is used to connect the system’s audio out signal to amplified speakers or headphones. Microphone jack The microphone jack is designed to connect the microphone used for video conferencing, voice narrations, or simple audio recordings.
HDMI port The HDMI (High Definition Multimedia Interface) port supports a Full-HD device such as an LCD TV or monitor to allow viewing on a larger external display. Rear air vents The air vents on the rear allow warm air to exit the VivoMini. IMPORTANT! For optimum heat dissipation and air ventilation, keep the air vents at least 10cm away from any obstructions. Power input (DC 19V) The supplied power adapter converts AC power to DC power for use with this jack.
Using your VivoMini 2
Getting started Connect the AC power adapter to your VivoMini To connect the AC power adapter to your VivoMini: A. Connect the AC power cord to the AC/DC adapter. B. Connect the DC power connector into your VivoMini’s power (DC) input port. C. Plug the AC power cord into a 100V~240V power source. NOTE: The power adapter may vary in appearance, depending on models and your region.
IMPORTANT! • We strongly recommend that you use only the AC power adapter and cable that came with your VivoMini. • We strongly recommend that you use a grounded wall socket while using your VivoMini. • The socket outlet must be easily accessible and near your VivoMini. • To disconnect your VivoMini from its main power supply, unplug your VivoMini from the power socket. NOTE: Power adapter information: • Input voltage: 100-240Vac • Input frequency: 50-60Hz • Rating output current: 3.
Connect a display panel to your VivoMini You can connect a display panel or projector to your VivoMini that has the following connectors: • HDMI connector • DisplayPort connector • VGA connector (use with a DisplayPort to VGA adapter or HDMI to VGA adapter) • DVI connector (use with an HDMI to DVI adapter) NOTE: The HDMI to DVI adapter, DisplayPort to VGA adapter, or HDMI to VGA adapter are each sold separately.
Connect the USB cable from keyboard or mouse You can connect generally any USB keyboard and mouse to your VivoMini. You can also connect a USB dongle for a wireless keyboard and mouse set. To connect a keyboard and mouse to your VivoMini: Connect the USB cable from your keyboard and mouse to any of the USB 2.0 ports of your VivoMini. Connecting keyboard or mouse via USB 2.
Turn on your VivoMini Press the power button to turn on your VivoMini.
Turning your VivoMini off If your VivoMini is unresponsive, press and hold the power button for at least four (4) seconds until your VivoMini turns off. Putting your VivoMini to sleep To put your VivoMini on Sleep mode, press the Power button once. Entering the BIOS Setup BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the VivoMini. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance.
Quickly enter the BIOS To quickly enter the BIOS: • Press the power button for at least four (4) seconds to shut down your VivoMini, then press the power button again to turn your VivoMini back on, then press or during POST. • When your PC is off, disconnect the power cord from your VivoMini’s power connector. Reconnect the power cable and press the power button to turn on your VivoMini. Press or during POST.
Memory upgrade 3
Upgrading memory modules Your VivoMini comes with two SO-DIMM memory slots that allow you to install two 2 GB, 4 GB, 8 GB, or 16 GB DDR4 260-pin SO-DIMMs for a maximum of 32 GB memory. IMPORTANT! You can only install DDR4 SO-DIMM to the VivoMini’s DIMM slots. NOTE: Refer to http://www.asus.com for the list of compatible DIMMs. To install or upgrade the memory modules: 22 1. Turn off your VivoMini. 2. Disconnect all cables and peripherals. 3. Place the VivoMini on a stable and flat surface.
4. Press down the latch at the rear panel to release the top cover. 5. Slide the top cover towards the rear of VivoMini until it is detached from the chassis. 6. Remove the cover and set aside.
7. Carefully slide the HDD or the Vivo DualBay adapter (with SSD or 2.5-inch HDD inside) from the SATA connector, then remove it from the drive bay. Removing the HDD from drive bay Removing the Vivo DualBay adapter (with SSD or 2.
HD 8. Prepare the memory module. 9. Release the screw that secures the SO-DIMM slot cover, then pry the slot cover open. Serial ATA connector Memory Memory SO-DIMM slot cover Serial ATA HDD drive bay 10. Align and insert the memory module into the slot (A) and press it down (B), until it is securely seated in place.
11. Replace the SO-DIMM slot cover and secure it with the screw. 12. For HDD and Vivo DualBay adapter, match the rubber heads of the screws with the four screw slots on the drive bay.
13. Carefully place the Serial ATA HDD or the Vivo DualBay adapter (with SSD or 2.5-inch HDD inside) into the drive bay, then slide the drive towards the SATA connector. Re-installing the HDD to the drive bay SATA connector Rubber head screw slot Rubber head screw slot Rubber head screw slot Re-installing the Vivo DualBay adapter (with SSD or 2.
14. Replace the top cover then slide it towards the front of VivoMini to re-attach. 15. Lock the latch to securely fasten the top cover to the chassis.
Appendix
Safety information Your VivoMini is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • • 30 Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source. Set up the system on a stable surface. Openings on the chassis are for ventilation.
Care during use • • • • Do not walk on the power cord or allow anything to rest on it. Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug the power cord from the power outlets before cleaning the system. If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. – The power cord or plug is damaged.
Regulatory notices REACH Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This Class B digital apparatus complies with Canadian ICES-003, RSS210, and CAN ICES-3(B)/NMB-3(B). This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Regional notice for California WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov ENERGY STAR complied product ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site Technical Support Telephone Fax Online support 4F, No. 150, Li-Te Rd., Peitou, Taipei 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 http://www.asus.com +86-21-3842-9911 +86-21-5866-8722, ext. 9101# http://qr.asus.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Asus Computer International Responsible Party Name: 800 Corporate Way, Fremont, CA 94539. Address: Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : VivoMini Model Number : VM45 Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules.
VivoMini VM45
