User's Manual

VivoMini VC66 Series

Quickly enter the BIOS

To quickly enter the BIOS:

• Pressthepowerbuttonforatleastfour(4)secondstoshutdown

your VivoMini, then press the power button again to turn your

VivoMini back on, then press <F2> or <Del> during POST.

• WhenyourPCiso,disconnectthepowercordfromyour

VivoMini’s power connector. Reconnect the power cable and

press the power button to turn on your VivoMini. Press <F2> or

<Del> during POST.

NOTE: POST (Power-On Self Test) is a series of software controlled

diagnostic tests that run when you turn on your PC.

Load default BIOS settings

To load the default values for each of the parameters in your BIOS:

• EntertheBIOSbyfollowingthestepsmentionedinthe Quickly

enter the BIOS section.

• NavigatetotheExit menu.

• SelecttheLoad Optimized Defaults option, or you may press

<F5>.

• SelectYes to load the default BIOS values.