User's Manual

VivoMini VC66 Series

Installing 2.5” HDD / SSD

NOTE:

• Theillustrationsinthissectionareforreferenceonlyandmay

vary per model.

• Thisbaysupports7mm/9.5mm2.5”HDDs/SSDs.

• Somemodelsmayonlysupportone(1)HDD/SSD.

To install or upgrade the HDD / SSD:

1. Follow steps 1-4 under the Upgrading memory modules section

to remove the top cover of your VivoMini.

2. Remove four (4) screws from the HDD/SSD bracket.

3. Remove the HDD/SSD bracket.

4. Remove the cable from the holder, then remove the holder

from the HDD/SSD bracket.