User Manual

6 7 8 9 10
Installing or upgrading the wireless card
To install or upgrade the wireless card:
1. Followsteps1-5onpages1-2undertheInstalling or upgrading memory modules section
ofthisguidetoremovethebottomcoverofyourVivoMini.
2. Alignandinsertthewirelesscardintothe lowerslotinsidetheVivoMini.Refertothe
illustrationforitslocation.
3. Gentlypushdownthewirelesscardontopofthescrewholesandfastenitusingthe
3mmroundscrew.
YourVivoMiniincludesamini-PCIeslotforhalf-sizewirelessandBluetoothadapters.
Refertohttp://www.asus.comforthelistofcompatiblewirelessandBluetoothadapters.
10. Placetherubberfootoneachscrewhole.Refertotheillustrationformoredetails.
IMPORTANT! Anumberisprintedundereachrubberfootandthisnumber
correspondstothatrubberfoot’slocationonthecover.Followtheorientationofeach
rubberfootandthenumbersequenceshownintheillustrationbelow.Therubber
foottsinonlyoneorientation.Notethepositionoftheholeoneachrubberfoot,as
shownintheillustrationbelow
NOTE:Ifyouwanttoremovetherubberfoot,useaatheadscrewdriverora
straightenedpapercliptodoso.
Installing or upgrading the M.2 SSD
To install or upgrade a half-size M.2 SSD:
1. Followsteps1-5onpages1-2undertheInstalling or upgrading memory modules section
ofthisguidetoremovethebottomcoverofyourVivoMini.
5. Followsteps7-9onpages3-4undertheInstalling or upgrading memory modules section
ofthisguidetoreplacethebottomcoverbackonyourVivoMini.
YourVivoMiniincludesaPCIeslotthatsupportsafull-sizeorahalf-sizeM.2SSD.
4. ConnecttheblackantennatoMAIN or andthewhiteantennatoAUX or .Refer
totheillustrationfortherightinstallationprocedure.
NOTE:Asoftclickingsoundindicatesthattheantennahasbeensecurelyattachedon
thewirelesscard.
4. Gentlypushdownthehalf-sizeM.2SSDontopofthescrewholeandfastenitusing
oneofthe3mmroundscrew.Refertotheillustrationforthelocationofthescrewhole.
3. Alignandinsertthehalf-sizeM.2SSDintoitsslotinsidetheVivoMini.Refertotheillustration
foritslocation.
2. Insertthehexagonscrew,asillustrated.
3. Gentlypushdownthefull-sizeM.2SSDontopofthescrewholeandfastenitusingone
ofthe3mmroundscrew.Refertotheillustrationforthelocationofthescrewhole.
4. Followsteps7-9onpages3-4undertheInstalling or upgrading memory modules section
ofthisguidetoreplacethebottomcoverbackonyourVivoMini.
2. Alignandinsertthefull-sizeM.2SSDintoitsslotinsidetheVivoMini.Refertotheillustration
foritslocation.
5. Followsteps7-9onpages3-4undertheInstalling or upgrading memory modules section
ofthisguidetoreplacethebottomcoverbackonyourVivoMini.
To install or upgrade a full-size M.2 SSD:
1. Followsteps1-5onpages1-2undertheInstalling or upgrading memory modules section
ofthisguidetoremovethebottomcoverofyourVivoMini.