Installation Guide

7 8 9 10 11 12
Installing or upgrading the M.2 SSD
To install or upgrade a half-size M.2 SSD:
1. Followsteps1-5onpages2-3undertheInstalling or upgrading memory modules section
ofthisguidetoremovethebottomcoverofyourVivoMini.
5. Followsteps7-10onpages4-6undertheInstalling or upgrading memory modules
sectionofthisguidetoreplacethebottomcoverbackonyourVivoMini.
YourVivoMiniincludesaPCIeslotthatsupportsafull-sizeorahalf-sizeM.2SSD.
4. ConnecttheblackantennatoMAIN or andthewhiteantennatoAUX or .Refer
totheillustrationfortherightinstallationprocedure.
NOTE:Asoftclickingsoundindicatesthattheantennahasbeensecurelyattachedon
thewirelesscard.
4. Gentlypushdownthehalf-sizeM.2SSDontopofthescrewholeandfastenitusing
oneofthe3mmroundscrew.Refertotheillustrationforthelocationofthescrewhole.
3. Alignandinsertthehalf-sizeM.2SSDintoitsslotinsidetheVivoMini.Refertotheillustration
foritslocation.
2. Insertthehexagonscrew,asillustrated.
3. Gentlypushdownthefull-sizeM.2SSDontopofthescrewholeandfastenitusingone
ofthe3mmroundscrew.Refertotheillustrationforthelocationofthescrewhole.
4. Followsteps7-10onpages4-6undertheInstalling or upgrading memory modules
sectionofthisguidetoreplacethebottomcoverbackonyourVivoMini.
2. Alignandinsertthefull-sizeM.2SSDintoitsslotinsidetheVivoMini.Refertotheillustration
foritslocation.
5. Followsteps7-10onpages4-6undertheInstalling or upgrading memory modules
sectionofthisguidetoreplacethebottomcoverbackonyourVivoMini.
To install or upgrade a full-size M.2 SSD:
1. Followsteps1-5onpages2-3undertheInstalling or upgrading memory modules section
ofthisguidetoremovethebottomcoverofyourVivoMini.
Installing 2.5” HDD (on selected models)
To install the 2.5” HDD:
1. Followsteps1-5onpages2-3undertheInstalling or upgrading memory modules section
ofthisguidetoremovethebottomcoverofyourVivoMini.
2. AlignthebundledbracketoneachsideoftheHDDandinsertfour(4)screwstosecure
the2.5”HDDtothebracket.
3. ConnectthebundledHDDcabletotheHDD,thensecuretheHDDandbrackettothe
bottomcoverofyourVivoMiniusingthefour(4)bundledscrews.
4. RemovethetapecoveringontheHDDcableandstickthecabletothebottomcoverof
yourVivoMiniasshownintheillustrationbelow.
5. ConnecttheHDDcabletoyourVivoMini,thenfollowsteps7-10onpages4-6underthe
Installing or upgrading memory modules sectionofthisguidetoreplacethebottomcover
backonyourVivoMini.
Installing or upgrading the wireless card
To install or upgrade the wireless card:
1. Followsteps1-5onpages2-3undertheInstalling or upgrading memory modules section
ofthisguidetoremovethebottomcoverofyourVivoMini.
2. AlignandinsertthewirelesscardintothelowerslotinsidetheVivoMini.
3. Gentlypushdownthewirelesscardontopofthescrewholesandfastenitusingthe
3mmroundscrew.
YourVivoMiniincludesamini-PCIeslotforhalf-sizewirelessandBluetoothadapters.
Refertohttp://www.asus.comforthelistofcompatiblewirelessandBluetoothadapters.
E10670_VivoMini_Memory_SSD_WiFi_installation_V3_fold.indd 7-12 2015/10/21 �� 04:55:11