User Guide

VT6410 User Manual – IDE RAID Controller

Preliminary Revision 0.2, November 11, 2002 42 RAID Software

Technologies, Inc.

onnect

VIA Technologies Inc.

Confidential

NDA Required

2. Another dialog box will pop up. If the source or mirror disk drive is only unplugged, click Cancel to stop rebuilding. Shut

down system. Plug in the absent disk drive and then reboot system. If the original disk drive is broken, plug in a new disk

drive and then reboot system. Click Next to proceed to the next step.

3. Select a disk drive from Available Disks and click on

to replace the broken drive and then click Next.