User Guide

VT6410 User Manual – IDE RAID Controller
Preliminary Revision 0.2, November 11, 2002 36 RAID Software
Technologies, Inc.
We
C
onnect
VIA Technologies Inc.
Confidential
NDA Required
2. After executing the “verify mirror” command, a dialog box will show the verifying process. You can pause or cancel this
process at any time. It may take a long time to verify the source and mirror disk if the capacity of the RAID is large.
3. When the mirror disk is not identical with the corresponding source disk, the mirror disk will be marked with a “need-sync”
flag. The icon used to indicate this status is
. A “need-sync” mirror disk should be synchronized as soon as possible.