User Guide

VT6410 User Manual – IDE RAID Controller
Preliminary Revision 0.2, November 11, 2002 29 RAID Software
Technologies, Inc.
We
C
onnect
VIA Technologies Inc.
Confidential
NDA Required
Add and Remove Spare Disk Drive
Add Spare Disk Drive
A spare disk drive can be added when a RAID 1 array is created. The capacity of the spare disk drive must be greater than or equal
to the capacity of the RAID 1 array. If there is no spare disk drive in a RAID 1 array, user can add a spare disk drive after RAID 1
array is created by clicking on
.
1. Select the RAID 1 array in the left windowpane and click on
. Then the available disk drives will be listed in a popup
window.
2. Select a disk drive and click on OK to add a spare disk drive to RAID 1.
3. A warning message will popup. Click Yes to finish adding the spare disk, or No to cancel.