User Guide

VT6410 User Manual – IDE RAID Controller

Preliminary Revision 0.2, November 11, 2002 15 BIOS Configuration Utility

Technologies, Inc.

onnect

VIA Technologies Inc.

Confidential

NDA Required

2. Destroy the Mirroring Relationship

This item cancels the data mirroring relationship of the broken array. For broken RAID 1 arrays, the data on the surviving disk

will remain after the destroy operation. For broken RAID 0+1 arrays, all data on the array will be lost after destroy operation.

However, Destroy the Mirroring Relationship is not recommend because the data on the remaining disk will be lost when

you use the hard drive to create another RAID 1 array.

3. Choose replacement drive and rebuild

This item enables the user to select an already-connected hard drive to rebuild the broken array. After choosing a hard drive,

the channel column will be activated.

Highlight the target hard drive and press <Enter>, a warning message will appear. Press Y to use that hard drive to rebuild, or press

N to cancel. Please note that rebuilding the array will destroy all the data on the replacement hard drive.

4. Continue to boot

This item skips the problem and allows the system to continue booting into OS.