User Guide

VT6410 User Manual – IDE RAID Controller
Preliminary Revision 0.2, November 11, 2002 9 BIOS Configuration Utility
Technologies, Inc.
We
C
onnect
VIA Technologies Inc.
Confidential
NDA Required
Delete Disk Array
A RAID can be deleted after it has been created. To delete a RAID, use the following steps:
1. Select Delete Array and press <Enter>. The channel column will be activated.
2. Select the member of an array that is to be deleted and press <Enter>. A warning message will display. Press Y to delete or
press N to cancel.
Deleting a disk array will destroy all the data on the disk array except RAID 1 arrays. When a RAID is deleted, the data on these
two hard disk drives will be reserved and become two normal disk drives.