User Guide

VT6410 User Manual – IDE RAID Controller
Preliminary Revision 0.2, November 11, 2002 8 BIOS Configuration Utility
Technologies, Inc.
We
C
onnect
VIA Technologies Inc.
Confidential
NDA Required
4. If RAID 0 or RAID 0+1 was selected in step 2, the block size of the array can also be selected. Use the arrow key to highlight
Block Size and press <Enter>. Then select a block size from the popup menu. The block size can be 4KB to 64KB.
5. Use the arrow key to highlight Start Create Process and press <Enter>. A confirmation message will appear. Press Y to
finish the creation, or press N to cancel the creation.
6. Important note: All existing content in the hard drive will be destroyed during array creation.