User Manual
3-4
Chapter 3: General Instructions
(DisplayPort/HDMI only): Allows an Adaptive-
Sync/FreeSync supported* graphics source to dynamically adjust display
refresh rate based on typical content frame rates for power efcient,
virtually stutter free and low-latency display update.
To activate Adaptive-Sync/FreeSync, turn off ELMB function first.
* Adaptive-Sync/FreeSync can only be activated within 40Hz ~ 165Hz.
* For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
(DisplayPort/DVI only): Turns on/off the ELMB (Extreme Low
Motion Blur) function. This function is available when the refresh rate is
120Hz, 144Hz or 165Hz (DisplayPort only).
To activate ELMB, turn off Adaptive-Sync/FreeSync function first.
Set the sound related setting from this menu.
Volume
Mute
Source
Sound
ASU S VG 2 78
Rac i ngM o de D isp l ayP o rt 1 920 x 108 0 @ 1 6 5Hz
: the adjusting range is from 0 to 100.
: toggles the monitor sound between on and off.
: decides the monitor sound comes from which source.
In this function, you can select your desired input source.
DVI
HDMI
Displa y P o r t
Input Select
ASU S VG 2 78
Rac i ngM o de D isp l ayP o rt 1 920 x 108 0 @ 1 6 5Hz