User Guide

E2845
VENTO 7700
Installing the power supply unit (PSU)
B
Removing the side cover
A
Installing an optical disk drive (ODD)
C
English
A 1. Turn two rear panel thumbscrews counterclockwise.
2. Push the side cover to the direction of the rear panel.
3. Tilt the side cover and slide it out of the chassis.
B 1. SlidethePSUintotheslotuntilitsnuglytsthemetal
rail.
2. Secure with screws.
3. Set the voltage selector according to the voltage in
your area.
C 1. Push the marked portion of the Magic Mask
®
to open.
2. Remove the drive bay cover.
3. Lift the drive bay lock.
4. Insert the ODD into the bay.
5. Align the ODD holes with the bay holes, then press
down the drive bay lock to secure the drive in place.
6. Connect cables.
Continued at the back
German French
Spanish
Traditional Chinese
Simplied Chinese
1
2
3
1
2
1
2
3
4
5