User Guide

2-3ASUS VE228 Series LCD Monitor

2.4 Connectingthecables

1. Connect the cables as the following instructions:

VGA

Earphone jack

HDMI

Audio-in

VE228TVE228N

VE228D

VE228S

VE228H

VGA

• To connect the audio cable: connect one end of the audio cable to the

monitor’s Audio-in port, the other end to the computer's audio-out port.

• To connect the power cord: connect one end of the power cord securely to

the monitor’s AC input port, the other end to a power outlet.

• To connect the VGA/DVI/HDMI cable:

a. Plug the VGA/DVI/HDMI connector to the LCD monitor’s VGA/DVI/HDMI

port.

b. Connect the other end of the VGA/DVI/HDMI cable to your computer's

VGA/DVI/HDMI.

c. Tighten the two screws to secure the VGA/DVI connector.

• To use earphones: connect the end with plug type to the monitor’s earphone

jack.

When these cables are connected, you can choose the desired signal from the

Input Select item of the OSD functions.

2. Gather all the cables with the cable management slot.

Cable management

slot